APRILIA SHIVER 900, Service Station Manual

Page: 126 / 444

To check the ABS fuse (I)
•
Remove the protective cover, take out
the fuse (I) and check whether the fila-
ment (2) is broken. In this case change
it with one of the same amperage.
MAIN FUSES DISTRIBUTION
Specification Desc./Quantity
H) 30A fuse Recharge, "F-D-C positive fuses", key positive, main relay, 5A
positive fuse (dashboard)
I) 20A fuse ECU ABS permanent positive
L) 5A fuse dashboard permanent positive
M) spare fuse -
The main fuses are located in the central part of the motorcycle, under the rider saddle.
Control unit
•
To remove the control unit, refer to chapter " Bodywork", "Air filter housing" section.
CONTROL UNIT - Diagnosis
Function
It manages the Ride by wire system, the injection/
ignition, the system safety checks and the self-di-
agnosis function
Level in electrical circuit diagram:
Each level in which the main component involves
the control unit
Position:
•
on the vehicle: to the left of the filter
housing
•
connector: on the control unit connec-
tor from 52 PIN ENGINE, connector
from 28 PIN VEHICLE
Pin out: See CONNECTORS paragraph
DIAGNOSTIC TOOL:INFO
(screen page/example values with key ON)
•
ISO code / -
•
Drawing number / - (identified inserted by the manufacturer)
Electrical system
SHIVER 900
ELE SYS - 126