APRILIA SHIVER 900, Service Station Manual

Page: 161 / 444

Coil
Function
Spark generation
Operation / Operating principle
With inductive discharge
Level in electrical circuit diagram:
Coils and injectors
Position:
•
on the vehicle: on the big end covers.
•
connector: For each coil 3 way black
connector. Front coil on the front side
filter housing; rear coil on the rear side
of the filter housing.
Electrical specifications:
0.7- 0.9
Ω
at ambient temperature
Pin out:
1. Power Vbatt
2. Secondary circuit ground
3. Activation from the control unit
DIAGNOSTIC TOOL:PARAMETERS
Example value with key ON: Actual start-up ad-
vance
Example value with engine on: Indicates the ad-
vance of the cylinder in which the combustion will
take place.
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING,
CAREFULLY READ THE GENERAL TROUBLESHOOTING
CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGIN-
NING OF THE CHECK AND CONTROL SECTION IN THE
ELECTRICAL SYSTEM CHAPTER.
DIAGNOSTIC TOOL: ACTIVATIONS
Front coil:
The secondary injection relay (no. 35 in the electrical circuit diagram, placed under the fuel tank, on the
right side of the filter housing. However, CHECK the relay identification with the cables colour - blue
taping) for 5 seconds and the pink coil cable is closed to ground for 2 ms per each second. It is rec-
ommended to disconnect the 4-way connector of the fuel pump to be able to hear the relay and injector
activation. Electrical continuity is required in the wiring for the relay to activate correctly: no errors are
generated in case of no activation.
SHIVER 900
Electrical system
ELE SYS - 161