APRILIA SHIVER 900, Service Station Manual

Page: 363 / 444

Attivazione/Disattivazione dispositivo ABS
Soltanto a moto ferma è possibile modificare lo
stato di attivazione/disattivazione del sistema ABS
ed è possibile farlo in due modi distinti:
1) Dalla schermata principale, mediante uno spos-
tamento breve verso sinistra o verso destra è pos-
sibile disattivare o riattivare il sistema ABS
Per tornare al menù "ABS" premere centralmente
in modo breev il selettore MODE.
CAUTION
IT IS DISABLED ONLY TEMPORARILY, WHEN THE KEY IS
INSERTED THE SYSTEM IS ALWAYS ACTIVE.
2) Entering the MENU, in the "RIDING MODE"
section and then in the "ABS" item Through a brief
central pressing on the central part of the MODE
selector, the "ABS" function is highlighted in red.
Briefly moving to left or right deactivates the func-
tion "Off".
This function allows you to disable the ABS system
that is normally active "On".
To return to the main "MENU", select the "EXIT"
menu item and briefly press on the central part of
the MODE selector.
CAUTION
IT IS DISABLED ONLY TEMPORARILY, WHEN THE KEY IS
INSERTED THE SYSTEM IS ALWAYS ACTIVE.
Guide to diagnosis
FOREWORD
Each time the key is set to ON, if at least one cur-
rent or stored error is detected*, the ABS warning
light turns on permanently.
The ABS system is automatically deactivated
The system operates perfectly just as any other
braking system without ABS
* Diagnosis is possible when exceeding 5 km/
h (3.1 mph).
Each time the key is set to ON, if at least one current or stored error is not detected immediately
in the system:
SHIVER 900
Braking system
BRAK SYS - 363