53
use and maintenance
Leonardo 125 - 150 - 250 - 300
REMOVING
THE REAR-VIEW MIRRORS
Carefully read p. 39 (MAINTENANCE).
The following information refers to one
rear-view mirror only, but is valid for both.
◆
Position the vehicle on the centre stand.
NOTE
Group the components of the left
and right rear-view mirrors separately.
◆
Remove the cover (1).
!
CAUTION
Hold the rear-view mirror (2), to prevent
it from accidentally falling down.
◆
Unscrew the screw (3).
Screw (3) driving torque: 20 Nm (2 kgm).
!
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care and avoid
scraping or damaging them.
◆
Remove the rear-view mirror (2).
◆
!
"
Take the support (4) and the
protection element (5).
◆
#
Remove the gasket (6).
REMOVING THE FRONT COVER
Carefully read p. 39 (MAINTENANCE).
◆
Position the vehicle on the centre stand.
◆
Unscrew and remove the screws (7).
!
CAUTION
Proceed with care.
Do not damage the tangs and/or their
seats.
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care and avoid
scraping or damaging them.
◆
Remove the front cover (8) by pulling it
downwards.
!
CAUTION
Upon reassembly, fit the tangs correctly
in the appropriate seats.
300
300
Leonardo125-300_UK.book Page 53 Tuesday, January 20, 2004 3:54 PM