manualshive.com logo in svg

Apricorn EZ Gig II, User Manual

Share
Download
Apricorn EZ Gig II User Manual Download Page 3

 

Copyright © Apricorn, Inc., 2000-2007                                                                                      3 

 

END-USER LICENSE AGREEMENT 
BY ACCEPTING, YOU (ORIGINAL PURCHASER) INDICATE YOUR ACCEPTANCE OF THESE TERMS. IF 

YOU DO NOT WISH TO ACCEPT THE PRODUCT UNDER THESE TERMS YOU MAY CHOOSE NOT TO 

ACCEPT BY SELECTING "I decline..." AND NOT INSTALLING THE SOFTWARE. 
  
All rights are reserved. The ORIGINAL PURCHASER is granted a LICENSE to use the software only, 

subject to the following restrictions and limitations. 
  
1. The license is to the original purchaser only, and is not transferable without prior written Permission 

from Apricorn. 
  
2. The Original Purchaser may use the Software on a single computer owned or leased by the Original 

Purchaser. You may not use the Software on more than a single machine even if you own or lease all 

of them without the written consent of Apricorn. 
  
3. The Original Purchaser may not engage in, nor permit third parties to engage in, any of the 

following: 
  
A. Providing or permitting use of or disclosing the Software to third parties. 
  
B. Providing use of the Software in a computer service business, network, timesharing or multiple user 

arrangement to users who are not individually licensed by Apricorn. 
  
C. Making alterations or copies of any kind in the Software (except as specifically permitted above). 
  
D. Attempting to un-assemble, de-compile or reverse engineer the Software in any way. 
  
E. Granting sublicenses, leases, or other rights in the Software to others. 
  
F. Making copies, or verbal or media translations, of the user's guide. 
  
G. Making telecommunication data transmission of the software. 
  
Apricorn has the right to terminate this license if there is a violation of its terms or default by the 
Original Purchaser. Upon termination for any reason, all copies of the Software must be immediately 

returned to Apricorn, and the Original Purchaser shall be liable to Apricorn for any and all damages 

suffered as a result of the violation or default. 
  
 ENTIRE RISK 
  
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU THE 

PURCHASER. APRICORN DOES NOT WARRANT THAT THE SOFTWARE OR ITS FUNCTIONS WILL 

Summary of Contents for EZ Gig II




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands