APRAMO ONE, Manual

Page: 12 / 24

For your child’s safety, ensure that the following checks are
carried out before every journey:
• The vehicle belt is passed through both of the belt guide
rings.
• The vehicle seat belt is taut, remove any slack if necessary
and is not twisted.
• The seat is placed up against the back of the vehicle seat,
without a gap.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the child’s
shoulders.
• The harness buckle is properly secured.
5.1.2 With 5-point h vehicle belt
1. Ensure that the 5-point harness is correctly installed.
(Refer to section 8)
2. Ensure that the 5-point harness is correctly adjusted.
(Refer to section 3.2)
3. Adjust the seat to the desired recline position (See section
3.4) and ensure that the recline mechanism is securely locked.
4. Rotate the seat to the forward facing position (See section
3.5) and ensure that the rotation mechanism is securely
locked.
5. Place the child car seat on the vehicle seat facing the front
of the vehicle (In the direction of travel). (fig. 33)
6. Pull out the vehicle seat belt as much as possible, and then
insert the lap portion of the seatbelt through the belt guides
on the base of the seat (22). Fasten the vehicle seat belt
buckle (23) and pull to remove any slack from the belt
webbing. (fig. 34)
7. Pass the diagonal portion of the vehicle seatbelt through
the 2 belt guide rings (17). (fig. 35)
8. Pull the seat belt webbing upwards as far as possible to
remove any slack, ensuring that no part of the vehicle
seatbelt is twisted, and close up the belt lock-off. (fig. 36)
9. Follow the steps shown in section 4.2.10 to secure your child
with the 5-point harness.
10