APRAMO ONE, Manual

Page: 5 / 24

3. Preparing the
APRAMO® ONE
TM
before Use
3.1 ISOFIX Setup
1. If your vehicle does not have ISOFIX guide socket, please
insert the guide socket (02) into the ISOFIX anchor (01). (fig. 1)
TIP: ISOFIX anchors are located between the backrest
and the seat cushion of your vehicle.
2. Pull the ISOFIX strap loop (03) out as far as it will go. (fig. 2)
1
3.2 Harness and headrest adjustment for Group 0+, I & II
(Group II can be used with 5-point harness)
1. Press down on the central adjuster, and pull the shoulder
straps towards you (05) (Do not pull on the shoulder pads
(06)), extending the 5-point harness as far as it will go. (fig. 3)
2. Pull upwards on the adjusting ring (07), whilst pulling up, or
pushing down the headrest to the required position (08).
The headrest (08) should be positioned so that the shoulder
straps fit level with the child’s shoulders. (fig. 5)
CAUTION: The shoulder straps (05) must be correctly
positioned as shown in fig. 5.
Adjust the headrest (08) correctly to protect the child safely.
The height of headrest (08) is to make the shoulder belts (05)
to be same level with the shoulder of child. (fig. 5)
CAUTION: The shoulder belts (05) must not run behind the
back of the child or at ear height or above the ears.
07
08
4
5
08
05
2
03
04
06
05
3
03