APRAMO ONE, Manual

Page: 9 / 24

4.2 Group 0+ (0 - 13 KG approx.)
with 5-point h vehicle belt
4.2.1 Ensure that the 5-point harness is correctly installed.
(Refer to section 8)
4.2.2 Ensure that the 5-point harness is correctly adjusted.
(Refer to section 3.2)
4.2.3 Adjust the seat to the fullest recline position (See section
3.4) and ensure that the recline mechanism is securely
locked.
4.2.4 Rotate the seat to the rearward facing position (See
section 3.5) and ensure that the rotation mechanism is
securely locked.
4.2.5 Place the child car seat on the vehicle seat facing the rear
of the vehicle (Against the direction of travel). (fig. 23)
4.2.6 Pull out the vehicle seat belt as much as possible, and
then insert the lap portion of the seatbelt through the belt
guides on the base of the seat (22). Fasten the vehicle
seat belt buckle (23) and pull to remove any slack from
the belt webbing. (fig. 24)
4.2.9 Using the 5-point harness
1. Depress the red button (19) to release the buckle, and
press the central adjuster (04) to pull out the shoulder
straps (05) (Do not pull on the shoulder pads (06)). (fig. 17)
2. Place your child in the seat.
3. Ensure that your child’s back is lying flat against the backrest
of the seat.
4. Guide the two buckle latches (20) together and insert into
the buckle (19) There will be an audible click when the buckle
is secured. (fig. 18, 19, 20)
5. Pull outwards on the adjustor strap (21) until the harness is
snug against your child’s body. Ensure that the harness straps
are not twisted at any point. (fig. 21, 22)
4.2.7 Pass the diagonal portion of the vehicle seatbelt through
the 2 belt guide rings in the belt lock-off pics (17). (fig. 25)
4.2.8 Pull the seat belt webbing upwards as far as possible to
remove any slack, ensuring that no part of the vehicle
seatbelt is twisted, and close up the belt lock-off. (fig. 26)
07