APRAMO ONE, Manual

Page: 18 / 24

9.1 Harness buckle maintenance
Buckle failure can cause injury; do not use any oil or other
lubricants on any part of the buckle. Buckle malfunctions are
usually caused by a build-up of debris such as food crumbs or
other small particles.
Signs of buckle malfunction:
• The buckle latches are slow to release when the red release
button is depressed.
• The buckle latches will not lock into the buckle securely.
• The buckle latches engage without an audible click.
• The buckle latches are difficult to insert (Any resistance is felt).
• The buckle opens only when extreme force is applied.
To clean the harness buckle
1. Follow steps shown in section 7 to remove the buckle from
the seat. (figs. 51, 53)
2. Soak the harness buckle in warm water with mild washing up
liquid only for at least an hour. Rinse and allow to air dry
thoroughly before replacing the buckle on the seat. (fig. 64)
9. Care and Maintenance
51
19
40
41
40
53 64
9.2 Cleaning the car seat covers
The seat covers are removable and washable, please refer
to the fabric care label on the seat cover for full instructions.
To remove the seat covers
1. Adjust the headrest to the highest position. (fig. 65)
2. Remove the cover of the headrest first.
3. Remove the remaining seat covers.
To refit the seat covers
1. Repeat the above steps in reverse order.
2. To fit and tidy up the seat cover with fabric tidier(45), ensure all
covers and trim are replaced correctly. (fig. 66)
9.3 Internal cushion of seat cover
1. Semicircle foam cushion (46) and internal cushion (47) of seat
cover are suitable for the rearward facing.
2. Internal cushion (47) of seat cover is suitable for Group I of
forward facing. (fig. 67)
CAUTION: Never use the child car seat without the covers
supplied, always ensure that the covers and harness straps
are correctly installed. In case of doubt, please contact our
Customer Service Department.
16
65
07
08
09
66
45
46
47
67