12
4.
You will see the IPNetcam’s images
5.
Click the button down of the image for each operational setting page.
6.
When you change any setting, please don’t forget to click the “
submit
” button in each page.
NOTE:
When only one unit of the IPNetcam is connected to a LAN, you can freely assign an IP address for
the IPNetcam. For example, there is a range of IPNetcam IP address from 192.168.1.1 to 192.168.1.253.You
can pick one for use from the range of the IP. It’s not necessary to set MASK and GATEWAY; leave the
settings as default.
When the IPNetcam is connected to a WAN, you must acquire a unique, permanent IP address and correctly
configure the MASK and GATEWAY settings according to your network architecture. If you have any
question regarding to those settings, please consult a qualified MIS professional or your ISP.
