Appro LC-7244 Installation & Operation Manual Download

Page: 43 / 93

5.1.5 Change the Application Setting

Change the Application Setting — SD Card Application Setting.

Please follow the steps below to change the SD CARD setting via the network as necessary to upload

recording data live.

Click on the

SD card

button on the top left to enter the “SD Card Application Setting” page.

SD Card setting page of MJPEG mode

SD Card setting page of MPEG4 mode

You can choose which SD card storage format to use, MJPEG (MJPEG mode only) or AVI.

Click on your selected format and "Submit" to set it.

Enter "Max MJPEG Numbers" entry if it's MJPEG format.

Enter its recording rate and duration in seconds, and click "Submit" for their setting if AVI is your

choice.

Description of function keys:

MJPEG Format:

One image per file.

Max MJPEG Numbers:

Sets the number of file sequences you can save per second.

AVI Format audio setting:

Unlike a single image file, this option offers a selected section of a

video record.

Recording Rate:

Sets your chosen frame rate of frames per second.

AVI Duration:

Predetermines the length of each video file in terms of seconds.

Enable SD Card Rewrite:

Tick to activate the SD card rewrite function.

SD Card Capacity:

The free capacity of the SD card.

SD Card Usage:

The percentage of the recorded file on the SD card.

Click and press the Yes button to format the SD card.

Summary of Contents for LC-7244






























































































Search results

Summary of Contents for LC-7244

Reviews:

Related manuals for LC-7244

Brands by name

Popular brands

Appro LC-7244, Installation & Operation Manual

Search results

Summary of Contents for LC-7244

Reviews:

Related manuals for LC-7244

Brands by name

Popular brands