Appro LC-6790 User Manual Download Page 65

Page: 65 / 106

Change the System Setting — Update Firmware.

Please follow the steps below to update the firmware through the network as necessary.

Click on the

Firmware Upgrade

button on the left side of the “Date and Time” page to enter the

“Firmware Upgrade” page.

Click on the “Browse…” button to select the UPDATE.BIN file which was copied into your

computer.

Click on the “Upload” button.

Note

DO NOT power off the IP camera while updating firmware.

Don’t interrupt the process while the unit is updating itself.

Please make sure that the UPDATE.BIN file is appropriate to the model of the unit. Updating

with the wrong UPDATE.BIN file may cause physical damage to the device.

The Temporary Internet Files (or cache) folder contains Web page content that is stored in your

hard disk for quick viewing. We suggest deleting the Temporary Internet Files immediately after

updating the firmware. To delete the files in the Temporary Internet Files folder, follow these

steps:

Summary of Contents for LC-6790











































































































Search results

Summary of Contents for LC-6790

Reviews:

Related manuals for LC-6790

Brands by name

Popular brands

Appro LC-6790, User Manual

Search results

Summary of Contents for LC-6790

Reviews:

Related manuals for LC-6790

Brands by name

Popular brands