34
DEVICE [ DVR ]
CH1 [ FRONT ]
CH2 [ RIGHT ]
CH3 [ BACK ]
CH4 [ LEFT ]
TITLE
TO MOVE
TO CHANGE
CLOCK:
This entry allows users to set the system time.
NOTE: The clock data is retained for about 3 months
after the 15-hour power supply is used up (in the
Operate On mode).
DAYLIGHT SAVING
This entry allows users to set the daylight saving
time.
OFF:
This disables the daylight saving time.
US:
Daylight saving time begins at 2:00 a.m. on the
first Sunday of April. The time reverts to standard
time at 2:00 a.m. on the last Sunday of October.
EUROPE:
( Except UK ) Daylight saving time
begins at 2:00 a.m. on the last Sunday of March.
The time reverts to standard time at 2:00 a.m. on
the last Sunday of October.
UK:
Daylight saving time begins at 1:00 a.m. on
the last Sunday of March. The time reverts to
standard time at 1:00 a.m. on the last Sunday of
October.
SET:
This sets the beginning and the end of the
daylight saving time.
TITLE:
This entry allows users to set the titles for each
video source or camera, in live or recording mode;
press the DISPLAY button to switch on the display
status to show the titles. The maximum length for
each title is 24 letters.
DELAY ON:
This entry sets the delay time of the relay on after
the DVR powers up. The selectable options are
OFF
,
0 SEC
,
1 MIN
,
5 MIN
and
10 MIN
DELAY OFF:
This entry sets the delay time of the relay off after
the DVR powers off. The selectable options are
OFF
,
1 MIN
,
5 MIN
,
10 MIN
,
60 MIN
and
NON
STOP
.
4.4 The COMMUNICATION Setting
Please refer to
6.1
RS-232 Protocols for more details.
COMM ID:
This is the Communication ID for the RS232
communication. After the DVR
receives a RS232
command, it checks if the <Dest ID> within the
code is the same as the COMM ID, in which case
the particular command can be accepted.
RS-232 ENABLE:
The RS-232 communication port can be either in
an importing or exporting mode according to your
applications.
ON:
This enables the RS-232 communication port.
When you wish the unit to be controlled by
an external device, please select this entry
for use.
OFF:
This disables the RS-232 communication
port.
RS-232 CONNECTION:
This item lets you control the following:
GPS:
Use the GPS connector with the GPS
receiver.
Note:
Refer to 1.5.4 for more information
about the correct pin assignment.
DATA BOX:
Use the DATA BOX connector if the
mobile DVR is compatible with it. Use it if
you want to connect only with the RS 232
port directly without using the GPS
connectors.
Note: You can select only one of the functions
between GPS or DATA BOX
simultaneously.
RECORD
ALARM
CLOCK/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO COMM PAGE
COMM ID
RS232 ENABLE
RS232 CONNECTION
BAUD
COMM SETTING
MAIN PAGE
: 0 1
: ON
: DATA BOX
: 9600
GPS SPEED
: Km/H
Summary of Contents for DVR-3064
Page 1: ...DVR 3064 Mobile Vehicle Video Recorder ...
Page 2: ......
