33
D uration
Set ting
Alar m
ac tivated
Alar m
deac tiv ated
R eset
Alar m r ecor ding
N on-Stop
Alar m
ac tivated
Alar m
deac tiv ated
D uration
Alar m r ecor ding
D uration
CLOCK
DAYLIGHT SAVING
TITLE
DELAY ON
DELAY OFF
CLOCK / TITLE
MAIN PAGE
: SET
: OFF
: SET
: OFF
: OFF
REC
Quality
Best High Standard Basic
Image
Size
60KB 50KB 40KB 32KB
AUDIO:
This option determines the way to record sound if
or as necessary.
OFF:
Disables the AUDIO recording.
11KHZ:
Enables the AUDIO recording and records
at the 11KHz sampling rate.
22KHZ:
Enables AUDIO recording and records at
the 22KHz sampling rate.
NOTE: The audio function can only be activated in
the following refresh rates in NTSC(PAL): 30(25),
15(12.5), 10(8.3), and 6(5) frames/sec.
ALM TYPE:
This option allows users to set a type of alarm
input corresponding to the sensor signal in use.
NO:
Normally Open. This is to be used with the
type of alarm sensor whose contact remains
open in normal conditions and closes in case
of activation.
NC:
Normally Closed. This is to be used with the
type of alarm sensor whose contact remains
closed in normal conditions and opens in
case of activation.
ALM DURATION:
This option allows users to set alarms for a certain
duration. You can select one of the six following
options:
0 SEC, 30SEC, 1 MIN, 5 MIN, 10 MIN,
and
NON-STOP.
PRE- ALARM:
This option determines that images before an
alarm occurs will be recorded in the hard-disk drive.
When an alarm is triggered the device will record
the image prior to the alarm for 50 images. (
10
frame/ sec
)
ON:
Enables this function.
OFF:
Disables this function.
NOTE: If the device is already in the recording
mode before an alarm occurs, the pre-alarm
recording will not take effect.
I/O CONNECTION:
This item is for the setting of the I/O connection.
( Please ref. to 1.7 ) Here you have two options of
determining your connection.
ALARM:
This item connects you with an alarm
sensor.
Set the 4 inputs of the I/O connection
as ALM1/ ALM2/ ALM3/ RESET. The Alarm
signals are used to trigger the alarm
recording.
VEHICLE SIGNAL:
Set the 4 inputs of the I/O
connection as LEFT/ RIGHT/ not applicable /
BRAKE. The vehicle signals will be recorded
with the video data.
4.3 The CLOCK/ TITLE Setting
This option allows you to set the system time, the
daylight saving time and the power delay time. This
option also allows users to set the titles for each
video source or camera, in live or recording mode.
RECORD
ALARM
CLOCK/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO CLOCK/ TIMER PAGE
Summary of Contents for DVR-3064
Page 1: ...DVR 3064 Mobile Vehicle Video Recorder ...
Page 2: ......
