11
C
OMMAND
L
INE
I
NTERFACE
Management and configuration of the Linktropy Mini
2
and Mini-G including the setting of all
emulation parameters, is via the Linktropy GUI. A command line interface (CLI) with a limited
feature set is also available and can be accessed via the
CONSOLE
interface or over the network
through a Telnet or SSH connection. The CLI provides the following subset of the functionality
available in the Linktropy GUI:
Configure the management IP address, subnet mask, and default gateway
Load previously stored emulations
To access the CLI, log into the device at the prompt as “
admin
”. There is no password.
SSH can be used to either log into the Linktropy CLI, similar to Telnet, or to execute a single
command.
The SSH and Telnet services can be enabled or disabled through the CLI using the
telnet
and
ssh
commands. By default, both are enabled. Multiple simultaneous sessions are allowed.
S
ECTION
11
C
OMMAND
L
INE
I
NTERFACE
35
