manualshive.com logo in svg

Apposite Technologies Linktropy MINI-G, User Manual

Share
Download
Apposite Technologies Linktropy MINI-G User Manual Download Page 26

 

S

ECTION 

6

   

D

EVICE 

S

ETTINGS 

T

AB

:

 

 

D

EVICE AND 

I

NTERFACE 

P

ARAMETERS

  

25 

6.4 Ethernet Ports 

By default, all Ethernet ports are set to auto-negotiate the proper speed and duplex settings. On 
the 10/100/1000baseT emulation ports, auto-negotiation can be disabled and the ports forced to 
a particular setting via the drop-down menu. However, it is strongly recommended to keep the 
interfaces set to auto-negotiate unless auto-negotiation is not working properly.   

Jumbo frames of up to 9 KB are supported on the Linktropy Mini-G. Jumbo frames are not 
supported on the Linktropy Mini

2

. 

A separate Ethernet port, labeled MGMT, is used for device management and monitoring. Auto-
negotiation cannot be disabled on the management port.   

 

 

If full-duplex is selected manually, the device the port is connected to must be forced 
to the same setting. 

 

Summary of Contents for Linktropy MINI-G


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands