4
L
INK
E
MULATION
T
AB
:
L
INK
E
MULATION
P
ARAMETER
C
ONFIGURATION
The
Link Emulation
tab contains all of the parameters for link emulation. Each parameter can be
configured separately for traffic from LAN A to LAN B and from LAN B to LAN A.
Basic parameter settings are always visible on the
Link Emulation
tab. Advanced parameters,
which generally only need adjustment for specialized conditions, are hidden by default. To display
the advanced parameters, click the s
how
link. Click the
hide
link to hide them again if desired.
The active configuration is not modified until the
Apply Changes
button at the bottom of the tab
is pressed. The
Apply Changes
button is grayed out when there are no changes to apply. It is also
grayed out if there are any invalid entries. To return to the active configuration without applying
any changes, press the
Clear Changes
button.
When the
Apply Changes
button is pressed, final validation of the configuration is performed. If
there are no errors in the configuration, the new configuration will take effect and the message,
“Configuration Updated” will be displayed in the Message Bar. If there are any errors in the
configuration, a red box will be displayed around the invalid field or an error message will be
displayed in the Message Bar.
Advanced parameter settings are used in the emulation, even if the parameters are
hidden.
S
ECTION
4
L
INK
E
MULATION
T
AB
:
L
INK
E
MULATION
P
ARAMETER
C
ONFIGURATION
14
