Installation and Service Manual – Under-the-Counter Point of Use 5 Stage Reverse Osmosis System with Booster Pump
Copyright © 2014 Applied Membranes, Inc.
All Rights Reserved.
Page 9
2. Install the drain clamp
a. Remove the black plastic nut from the front of the drain saddle
assembly and set aside.
b. Place one half of the plastic drain saddle assembly on each
side of the drain pipe with the fitting, and clamp loosely using
the nuts and bolts included.
c. Align the hole drilled in the drain pipe with the hole in the drain
saddle. A drill bit or other long narrow object may be used to
help align correctly.
d. Use Phillips screwdriver to tighten the clamp. Avoid over-
tightening.
3. Install the drain tubing.
a. Slide the black nut onto the end of the black plastic tubing,
threads facing outward.
b. Insert the end of the black tubing into the fitting on the drain
saddle.
c. Secure the connection by tightening the nut onto the threaded
fitting.
4. Connect to the RO System
Connect the other end of the tubing to the ‘out’ side of the flow
restrictor on the RO System.
NOTE: Some states require the use of an air gap faucet. Check your local plumbing code to assure
compliance.
