background image

Introduction

5

European Union Declaration of Conformity Consumer Audio
Associated Equipment

EU Directives Covered by this Declaration:

89/336/EEC Electromagnetic Compatibility Directive, as amended by
92/31/EEC & 93/88/EEC 72/23/EEC Low Voltage Equipment Directive, as
amended by 93/68/EEC.

Products covered by this declaration: ScreenPlay Nonlinear Video Editor,
Sequel Nonlinear Video Editor.

Basis on which conformity is being declared: The products identified above
comply with the requirements of the above EU Directives by meeting the
following standards:

EN55013: 1997 EMC emissions test requirements for “Consumer Audio
Associated Equipment” as follows: Mains Terminal Disturbance Voltage Test
(Clause 3.2, 150 kHz - 30 MHz); Disturbance Power Tests (Clause 3.5, 30
MHz - 300 MHz). 

EN50082-1: 1992 IEC801-2(1984) IEC 801-3 (1984) IEC 801-4 (1988)
EMC immunity tests per the “Essential Protection Clause” of the EMC
Directive as follows: Electrostatic Discharge (8 kV Air discharge); RF
Immunity (3 V/m 27-500 MHz CW); Fast Transient immunity (1 kV AC
line; 0.5 kV I/O lines>3m).

EN 60950 (1993), IEC 950 (1993) Safety of Information Technology
Equipment, Including Electrical Business Equipment.

Attention: The attention of the specified, purchaser, installer, or user is 
drawn to special measures and limitations about usage, which must be
observed when the product is taken into service to maintain compliance with
the above directives. Details of these special measures and limitations are on
page 7 of this user manual.

Authority: 

Applied Magic, Inc. Europe AG
Schulhausstrasse 27
CH-8600 Dubendorf, Switzerland

Applied Magic Inc:

5845 Owens Avenue
Carlsbad, CA 92008
U.S.A.

Summary of Contents for ScreenPlay



















































































Reviews: