System Basics
24
Full Screen
– Puts the system in full screen mode, so playback of video will
fill the entire screen and no on-screen controls will appear. Pressing this key
again will turn off the full screen mode.
Go to the beginning (or “in-time”) of a selected video. Pressing
Shift + will take you to the beginning of a StoryBoard.
Go to the end (or “out-time”) of a selected video. Pressing Shift +
will take you to the last clip on a StoryBoard.
Rewind rapidly through the selected video in one second
increments.
Pause play of video.
Fast Forward through the selected video in one second increments.
Access the record screen. Record video source to the hard drive.
Stop play of video.
Play selected Clip or StoryBoard from the beginning.
Rewind one frame.
Use the Break/Split key to stop recording the current Clip and
immediately begin recording a new clip.
Advance one frame.
Play selected Clip, StoryBoard, or StoryBoard part from current
cursor/pointer position.
Set Key Frame
– Selects the video frame to be used as a thumbnail to
represent that video. When playing a video clip or when the video is paused,
press this key to select a particular frame to use as the thumbnail representing
the clip in the bin and on the StoryBoard.
Set In
– Create an “in” marker based on the position of the video cursor bar
(see “Cursor Bar” on page 28).
Set Out
– Create an “out” marker based on the position of the video cursor
bar (see “Cursor Bar” on page 28).
Details
– Switch between Detail view and StoryBoard view.
Help
– Accesses on-screen help text.