- 67 -
6.10 Network Setup
In Setup Menu display, press
▲▼
◄►
to change the highlighted option to Network,
and then press
ENTER
to call up Network Setup as shown.
The Network Setup allows the administrator to setup all Ethernet network related
parameters. Please check with your network administrator to set these parameters
correctly.
The general operations are as below:
▲▼
◄►
(Mouse: Left click)
Press these buttons to select the items.
ESC
(Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display. If
the Save dialog is shown, press
ENTER
to exit and save,
ESC
(Mouse: Right
Click)
to exit without saving.
Following is a brief description for each item and its specific operations:
Net Type – Static IP, PPPoE, or DHCP. For internet access, please make sure
the below IP Address is a public IP address; otherwise, (1) a router with
public IP address is required, and the router must be setup for port mapping
(forwarding) to the DVR, or (2) CMS server must be used (
Sec. 6.10.4
).
Press
+/-
buttons to change the Net Type.
IP Address – Ethernet IP address of the “Net Type” above for the system. To
