- 36 -
Installed – whether this camera is installed or not. If installed, the following
items will be settable. Press
ENTER
or
+/-
(Mouse: Left click)
to
check/uncheck this item. The default setting is “
ˇ
ˇ
ˇ
ˇ
” - checked.
Resolution – the record resolution for the camera. For NTSC, it can be 960x480,
720x480, 960x240, 720x240, 480x240, or 360x240; for PAL, 960x576, 720x576,
960x288, 720x288, 480x288, or 360x288. Press
+/-
buttons to select the
resolution.
PTZ ID – the PTZ ID of this camera if it’s a PTZ camera. The PTZ ID has to be
consistent with the setting of this camera. Please refer to the manual of the
camera for the ID setting. Press
+/-
buttons to change the value (N/A or 0-255).
The default setting is “N/A” – Not Available, which means that it’s not a PTZ
camera.
6.2 Camera Setup
In Setup Menu display, press
▲▼
◄►
to change the highlighted option to Camera,
and then press
ENTER
(Mouse: Left click)
to call up Camera Setup display.
The Camera Setup allows the administrator to define the attributes for each camera.
There are up to 4 cameras which can be connected to the system.
The general operations are as below:
