- 18 -
I/R remote controller
The user may use I/R remote controller to control the digital video/audio recorder.
Call monitor
Connect the main monitor output connector to a surveillance TV monitor. This
monitor can be set to displays the full screen images of the cameras associated
with the events (alarm or motion) or the images from the installed cameras
sequentially according to the SEQ Display Setup (
Section 6.4
) for call monitor.
PTZ Cameras (Optional)
Connect the RS-485 connector to PTZ camera(s) via the appropriate cable. The
system supports a variety of different PTZ cameras, including Pelco D protocol
Dome, SamSung SCC-641P, Kalatel Cyber Dome, Bosch AutoDome, etc. But
different PTZ cameras can coexist in a system only if they support the same
protocol. Please make sure to set the PTZ ID of the camera(s), and setup the
camera (
Section 6.1
), and RS-422/485 (
Section 6.9
) accordingly.
RS-485 keyboard or Terminal (Optional)
Connect the RS-485 connector to a RS-485 keyboard controller or VT-100
terminal via the appropriate cables. Please refer to the diagram above for the
correct connection. Please make sure to setup the RS-422/485 configurations as
described in
Section 6.9
accordingly. Please refer to
Appendix C
for the
Keyboard Control Protocol for the digital video recorder.
