Safety Rules
SiOne Page
3
Safety Rules
Before using the device, the instruction manual must be carefully read
Improper installation of the device could put lives or health in danger
All wires in the system should be correctly connected before connecting to power
Always turn off the power supply of the device before making any modifications to the connection cables in the system
Device should be in compliance of the manufacturer’s specifications during use(incl. power supply voltage, temperature,
humidity, …)
Do not install in hazardous areas
Mounting Recommendations
The device was designed to provide the some level of resistance to disturbances that can occur in industrial environments. In
environments with an unknown level of interference, the following measures are recommended to prevent possible interference
with the device:
Avoid installing conducting measurement wires in the immediate vicinity and/or parallel to power and power lines
Use shielded cables
Avoid proximity of remote control units, electromagnetic meters, high power loads and other disturbances
Avoid phase or group power regulation loads and other devices that generate high impulse noise
Manufacturer’s Information
The manufacturer reserves the right to make changes in the instruction manual without prior notice.
