9
A.P.O. - ELMOS v.o.s., Pražská 90, Nová Paka 509 01
tel. +420 493 504 261, fax: +420 493 504 257, e-mail: [email protected]
3
PANELMETER DESCRIPTION
1
2
3
4
5
6
7
8
2
- Input „IN“ indicators
No. of of selected input is indicated with respective indicator. Individual inputs are selected with keys „UP“
and „DOWN“. No. of inputs depends on selected configuration.
1
- Display
Five-digit display for indication of measured value. With parameter programming display show clear reports.
8
- Output „OUT“ indicators
Indicators OUT 1 to OUT 4 indicates state of individual outputs in the following manner: indicator flashing
– output switched, indicator is not flashing – output is off.
7
- Key „SET“
Key „SET“ is used for setting data, programming termination, data uploading into EEPROM and return to
operating mode.
6
- Key „DOWN“
Key „DOWN“ is used for browsing parameters and setting of numeric data when programming. Pushing and
keeping down of the key speeds up browsing and setting procedure.
5
- Key „UP“
Key „UP“ is used for browsing parameters and setting of numeric data when programming. Pushing and kee-
ping down of the key speeds up browsing and setting procedure.
4
- Key „MENU“
Key „MENU“ is used for entering configuration menu and setting mode.
fig. 2
3
- Bargraph
Bargraph relates to measured value that is determined with pre-set range of STR and END.
E.g. if start of range (STR) is 0 and end (END) 200 and measured value shall be on level 100, bargraph shall in-
dicate half of the scale. Bargraphs is formed with column of LED diodes.
3.1
Front panel
