A.P.O. - ELMOS v.o.s., Pražská 90, Nová Paka 509 01
tel. +420 493 504 261, fax: +420 493 504 257, e-mail: [email protected]
28
8
PANELMETER FUNCTIONS
Key „MENU“ is used to enter configuration menu and setting mode.
Key „UP“ is used to scroll and set the value in configuration mode.
Keep the key pressed for approx. 3 s to speed up scrolling and setting.
Key „DOWN“ is used to scroll and set the value in configuration mode.
Keep the key pressed for approx. 3 s to speed up scrolling and setting.
Press „SET“ key to confirm the setting, finish configuration, enter data to EEPROM and to return to
working mode.
Caution:
Beware of TIME OUT function.
If any key is not pressed in configuration mode during the period of 1 minute regulator
switches by means of TIME OUT function to working mode without saving of selected pa-
rameters!
Bargraph relates to measured value, that is given by set range STR and END.
It roughly indicates amount of measured value within limits set by a user. Thanks to these properties of bar-
graph it is possible to find out immediately the limits of measured value oscillation.
Press MENU key to enter configuration menu, scroll to function BAR-1 to BAR-4, press MENU key repeatedly to
enter submenu where the start of bargraph range STR can be selected. Press MENU key again to get to setting
mode. Set required value with UP and DOWN keys. Press SET to confirm the setting.
To set the end of bargraph range scroll in configuration menu to function END. Setting procedure is identical
with STR.
E.g. the start of range (STR) is 0 and the end (END) 200 and measured value shall be on level 100, bargraph
shall indicate to the half of the scale. Bargraph is formed with column of LED diodes.
8.7
Bargraph
9
FUNCTIONS OF PANELMETER MENU
9.1
Functions of buttons in setting mode
input 1
input 2
input 3
input 4
