33
A.P.O. - ELMOS v.o.s., Pražská 90, Nová Paka 509 01
tel. +420 493 504 261, fax: +420 493 504 257, e-mail: [email protected]
9
FUNCTIONS OF PANELMETER MENU
dp
setting of decimal point position – refers to most numerically input parameters.
Options:
00000.
units are displayed
0000.0
tenths are displayed
000.00
hundredths are displayed
00.000
thousandths are displayed
strs
- Setting of start of input value measurement range The function sets start of range of input
value measurement. Parameter is important only with selection of current (4 to 20 mA or 0 to
20 mA) or voltage (0 to 10 V) input signal.
ends
- Setting of ending of input value measurement range
The function sets the ending of range of input value measurement. Parameter is important only
with selection of current (4 to 20 mA or 0 to 20 mA) or voltage (0 to 10 V) input signal.
offs
- Setting of measured input value offset
Generally it is possible to compensate any inaccuracy of measurement with offset. If it is not
necessary to set any offset or compensation, set the value to 0.
