37
A.P.O. - ELMOS v.o.s., Pražská 90, Nová Paka 509 01
tel. +420 493 504 261, fax: +420 493 504 257, e-mail: [email protected]
9
FUNCTIONS OF PANELMETER MENU
9.2.7
Configuration of bargraph - BAR-1 to BAR-4
Function BAR-1 to BAR-4 parameters
str
Setting of bargraph range start
This parameter is used for setting the bottom limit of bargraph range. When measured value drops
to bottom limit of set range, all bargraph LEDs stop flashing.
end
Setting of bargraph range end.
This parameter is used for setting the top limit of bargraph range. When measured value
reaches top limit of set range, all bargraph LEDs start flashing.
For detail description of setting refer to page 28, chapter „Bargraph“.
measured value
function selection
