![background image](http://html.mh-extra.com/html/aplha-innotec/hmd-1-e/hmd-1-e_operating-manual_2953646004.webp)
4
Subject to change without notice | 83053600fUK – Translation of the original operating manual | ait-deutschland GmbH
Intended use
The hydraulic module is a functionally-necessary
accessory for dual air/water heat pumps intended for
outdoor installation. Taking into account the limits of
application, the unit can be used in combination with
an outdoor installation dual air/water heat pump in new
or existing heating systems.
The unit may be used only for the intended use. This
means, in conjunction with a dual air/water heat pump:
●
for heating
●
for cooling (RX variants only)
●
for domestic water heating
The unit may be operated only within its technical
parameters.
Overview “Technical data / Scope of delivery”
and overview “Technical data
/
Scope of
delivery” of the operating manual for the
heat pump to which the hydraulic module is
connected.
Disclaimer
The manufacturer is not liable for losses resulting from
any use of the unit which is not its intended use.
The manufacturer’s liability also expires:
●
if work is carried out on the unit and its compo-
nents contrary to the instructions in this operat-
ing manual
●
if work is improperly carried out on the unit and
its components
●
if work is carried out on the unit which is not de-
scribed in this operating manual, and this work
has not been explicitly approved by the manu-
facturer in writing
●
if the unit or components in the unit have been
altered, modified or removed without the explicit
written consent of the manufacturer
Safety
The unit is safe to operate for its intended use. The
construction and design of the unit conform to current
state of the art standards, all relevant DIN/VDE
regulations and all relevant safety regulations.
Every person who performs work on the unit must
have read and understood the operating manual prior
to starting any work. This also applies if the respective
person has already worked with such a unit or a similar
unit or has been trained by the manufacturer.
Every person who performs work on the unit must
comply with the applicable accident prevention and
safety regulations. This applies in particular to the
wearing of personal protective equipment.
DANGER!
Risk of fatal injury due to electric shock!
Electrical connections may be installed
only by qualified electricians.
Before opening the unit, disconnect the
system from the power supply and secure
it from being switched back on!
WARNING!
Only qualified technicians (trained heating,
cooling and electrical technicians)
may perform work on the unit and its
components.
WARNING!
Observe safety labels on and in the unit.
ATTENTION!
For safety reasons:
Never disconnect the unit from the power
supply, unless the unit is being opened.