9
Subject to change without notice | 83053600fUK – Translation of the original operating manual | ait-deutschland GmbH
Installation
The following applies to all work to be done:
NOTICE
Always comply with the applicable local acci-
dent prevention regulations, statutory regula-
tions, ordinances, guidelines and directives.
Installation location
ATTENTION
Install the unit only inside buildings.
The installation area must be frost-free and dry. It must
fulfil the relevant local regulations.
Dimensional drawing and installation plan for
respective model.
Transport to installation location
To prevent damage during transport, always transport
the unit to final installation location in its original
packaging.
ATTENTION
The unit must not be lifted up by the switch
box and transported.
www.alpha-innotec.de
D - 95359 Kasendorf
Industriestraße 3
Alpha-InnoTec GmbH
$replaced
Ers. d.
$replaces
Ers. f.
Benennung
Zust.
Änderungstext
Datum
Von
Blatt
von
Datum
Name
Erstellt
Gepr.
ArtikelNr.
siehe
Typenschild
siehe
Typenschild
ATTENTION
Never use components and hydraulic con-
nections on the unit for purposes of trans-
port.
Installation
CAUTION!
Ensure the wall has the necessary load bear-
ing capacity.
Possible installation situation,
Example: HMD 1/E with row tank
1 Buffer storage tank
2 Hydraulic module
3 Domestic hot water tank
Hold the drilling template at the right height and
mark the 3 drilling holes.
Note the safety and service clearances
required, see “Installation plan”.
Lift the hydraulic module out of the box: