![background image](http://html.mh-extra.com/html/aplha-innotec/hmd-1-e/hmd-1-e_operating-manual_2953646010.webp)
10
Subject to change without notice | 83053600fUK – Translation of the original operating manual | ait-deutschland GmbH
Remove the top section from the front by pulling
on the recessed grips.
Example: HMD 1/E:
1 Recessed grips
Remove internal packaging material (transport
safeguards).
Use the anchors and bolts supplied to fix the
hydraulic module to the wall:
CAUTION!
Hands and fingers could be crushed during
the following tasks!
The anchors are only suitable for use in the following
types of walls:
●
Concrete
●
Solid lightweight concrete blocks
●
Cavity blocks made of lightweight concrete
●
Cellular concrete
● Prestressed concrete - hollow ceiling/floor slabs
●
Natural stone with sealed joints
●
Solid sand-lime blocks
●
Perforated sand-lime bricks
●
Solid bricks
●
Vertically-perforated bricks
● Hollow floors/ceilings made of clay bricks, con
-
crete or similar
●
Solid gypsum boards
● Gypsum boards and gypsum fibre boards
●
Particle boards
The board material must be dimensioned with
sufficient thickness to ensure secure fixing.
Appropriate fixing material must be provided on site
for other types of wall constructions.
ATTENTION
Leaving a gap between the unit and the
wall helps back ventilation and may not be
sealed or closed off.
Cable ducts must be laid at a distance of
at least 2 cm from the hydraulic module.
For reversible variant:
Mount thread covers on the hanger bolts.
Screw adapter with safety component onto hy-
draulic module.
Following the leak test, use insulation included in
the scope of supply to insulate adapter and safety
component.