manualshive.com logo in svg

Aplex OPC-5XX7, User Manual

Introducing the Aplex OPC-5XX7, a cutting-edge device that revolutionizes your user experience! Unlock its full potential with the comprehensive User Manual, available for free download at manualshive.com. Seamlessly navigate through its features and functionalities, making the most of this exceptional product.

Share
Download
background image

OPC-5XX7 User Manual 

81

5.2.2 Software Functions 

Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is 
connected but not calibrated. Follow the procedures below to carry out calibration. 
1. After installation, click the PenMount Monitor icon “PM” in the menu bar. 
2. When the PenMount Control Panel appears, select a device to “Calibrate.”

 

 
 

PenMount Control Panel 

The functions of the PenMount Control Panel are 

Device, Multiple Monitors 

,

Tools 

and 

About

, 

which are explained in the following sections.

 

 

Device 

In this window, you can find out that how many devices be detected on your system. 

 

Calibrate  

This function offers two ways to calibrate your touch screen. ‘Standard Calibration’ adjusts most touch 
screens. ‘Advanced Calibration’ adjusts aging touch screens.   

Standard Calibration   

Click this button and arrows appear 
pointing to red squares. Use your finger or 
stylus to touch the red squares in 
sequence. After the fifth red point 
calibration is complete. To skip, press 
‘ESC’. 

 

Summary of Contents for OPC-5XX7




























































































Reviews:

No comments

Related manuals for OPC-5XX7

sanowell ComfortTherm Series Operation Manual preview
ComfortTherm Series
Brand: sanowell Pages: 24
PORT DESIGNS PORT SECURITY CABLE Brochure preview
PORT SECURITY CABLE
Brand: PORT DESIGNS Pages: 1
Stiga HPS 550 R Instruction Manual preview
HPS 550 R
Brand: Stiga Pages: 18
NPower BATTERY TRICKLE CHARGER User Manual preview
BATTERY TRICKLE CHARGER
Brand: NPower Pages: 3
Havis KK-K9-C22-K Installation Instructions Manual preview
KK-K9-C22-K
Brand: Havis Pages: 8
FXGear NOON VR PRO Quick Start Manual preview
NOON VR PRO
Brand: FXGear Pages: 9
Barco BarcoProfile Supplementary Manual preview
BarcoProfile
Brand: Barco Pages: 4
Perel BG90009 User Manual preview
BG90009
Brand: Perel Pages: 20
Iron logic Matrix III EH User Manual preview
Matrix III EH
Brand: Iron logic Pages: 4
NORPOLE NPDH30 User Manual preview
NPDH30
Brand: NORPOLE Pages: 26
Noro Pearl Manual preview
Pearl
Brand: Noro Pages: 20
Temsa TS30 2012 Electronics And Wiring Manual preview
TS30 2012
Brand: Temsa Pages: 32
Altec Lansing INMOTION COMPACT Brochure preview
INMOTION COMPACT
Brand: Altec Lansing Pages: 2
Jacuzzi Mynima 80 Sphere Installation Manual preview
Mynima 80 Sphere
Brand: Jacuzzi Pages: 45
Laddomat 11-200 User And Installation Instructions Manual preview
11-200
Brand: Laddomat Pages: 38
OCZ VERTEX PLUS Datasheet preview
VERTEX PLUS
Brand: OCZ Pages: 2
RADSON BENEFITS Manual preview
BENEFITS
Brand: RADSON Pages: 7
Karl Storz T-scope series Instruction Manual preview
T-scope series
Brand: Karl Storz Pages: 156

Brands by name

Popular brands

Load more brands