
OPC-5XX7 User Manual
36
Base Memory 639K
Extended Memory 1038336K
Total Memory 1039360K
↑↓→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Date
This item allows you to set a desired system date (usually current date). The date format is
<day><month><date><year>.
Day
It is a read-only and bios-defined weekday attribute ranging from Sun (Sunday) to Sat
(Saturday).
Month
It is a month attribute ranging from Jan (January) to Dec (December).
Date
It is a date attribute ranging from 1 to 31 and can be modified via numeric keys.
Year
It is a user-defined year attribute.
Time
This item allows you to set a desired system time (usually current time). The time format is
<hour><minute><second>.
Channel 0 Master / Channel 0 Slave
Channel 1 Master / Channel 1 Slave
Press PgUp/<+> or PgDn/<-> key to select among Manual, None and Auto type. Note that the
specification of your drive device must be in compliance with the contents of Drive Table. If the
information registered in this item is not correct, your hard disk will not work properly; if your hard disk
specification is not found or does not conform to or the Driver Table, you may select Manual type to set
the specification manually.
If you choose Manual, you will be requested to enter relevant information in the following entries.
Keyboard input is also supported. For details, you may refer to the instructive materials provided by
distributor or device manufacturer.
If a SCSI HDD device is used, set this item to "NONE".
If a CD-ROM drive is connected to the HDD port, set this item to "NONE"
AccessMode
Options are: Auto, Normal, Large and LBA
Cylinder
Number of cylinders
Head
Number of heads
Precomp
Write precompensation cylinder
Landing Zone
Head landing zone
Halt on
The item allows you to determine when the system will stop. Options are: No Errors; All Errors; All,
But Keyboard.
No Errors
The system boot will not stop for any error.
All Errors
Whenever the BIOS detects a non-fatal error, the
system boot will stop.
All, But Keyboard The system boot will not stop for a keyboard error but
stop for all other errors as detected by BIOS. (default)
Summary of Contents for OPC-5XX7
