Aplex APC-3X19A User Manual Download

Page: 91 / 99

APC-3X19A User Manual

PenMount Monitor Menu Icon

The PenMount monitor icon (PM) appears in the menu bar of Windows 7/8.1 system

when you turn on PenMount Monitor in PenMount Utilities.

PenMount Monitor has the following function

Control Panel

Open Control Panel Windows

Beep

Setting Beep function for each device

Right Button

When you select this function, a mouse icon appears in

the right-bottom of the screen.

Click this icon to switch between Right and Left Button unctions.

Exit

Exits the PenMount Monitor function.

Configuring the Rotate Function

1. Install the rotation software package.

2. Choose the rotate function (0°, 90°, 180°, 270°) in the 3rd party software. The

calibration screen appears automatically. Touch this point and rotation is

mapped.

NOTE:

The Rotate function is disabled if you use Monitor Mapping

Summary of Contents for APC-3X19A




































































































Search results

Summary of Contents for APC-3X19A

Reviews:

Related manuals for APC-3X19A

Brands by name

Popular brands

Aplex APC-3X19A, User Manual

Search results

Summary of Contents for APC-3X19A

Reviews:

Related manuals for APC-3X19A

Brands by name

Popular brands