Aplex APC-3X19A User Manual Download Page 46

Page: 46 / 99

APC-3X19A User Manual

3.4 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.

CPU_FAN1 Setting

This allows you to set CPU fan 1’s speed. Configuration options: [Full On] and
[Automatic Mode]. The default value is [Full On].

CHA_FAN1 Setting

This allows you to set chassis fan 1’s speed. Configuration options: [Full On]
and [Automatic Mode]. The default value is [Full On].

Over Temperature Protection

Use this to enable or disable Over Temperature Protection. The default value
is [Enabled].

Case Open Feature

This allows you to enable or disable case open detection feature. The default
is value [Disabled].

Clear Status

This option appears only when the case open has been detected. Use this
option to keep or clear the record of previous chassis intrusion status.

Summary of Contents for APC-3X19A




































































































Search results

Summary of Contents for APC-3X19A

Reviews:

Related manuals for APC-3X19A

Brands by name

Popular brands

Aplex APC-3X19A, User Manual

Search results

Summary of Contents for APC-3X19A

Reviews:

Related manuals for APC-3X19A

Brands by name

Popular brands