Aplex APC-3X19A User Manual Download

Page: 74 / 99

APC-3X19A User Manual

This chapter describes how to install drivers and other software that will allow your
touch screen work with different operating systems.

5.1

Windows 7/8.1 Universal Driver Installation for

PenMount 6000 Series

Before installing the Windows 7/8.1 driver software, you must have the Windows

7/8.1 system installed and running on your computer. You must also have one of the

following PenMount 6000 series controller or control boards installed: PM6500,

PM6300.

5.1.1 Installing Software(Resistive Touch)

If you have an older version of the PenMount Windows 7 driver installed in your

system, please remove it first. Follow the steps below to install the PenMount

DMC6000 Windows 7 driver.

Step 1.

Insert the product CD, the screen below would appear. Click

Touch Panel

Driver

from the list

Summary of Contents for APC-3X19A




































































































Search results

Summary of Contents for APC-3X19A

Reviews:

Related manuals for APC-3X19A

Brands by name

Popular brands

Aplex APC-3X19A, User Manual

Search results

Summary of Contents for APC-3X19A

Reviews:

Related manuals for APC-3X19A

Brands by name

Popular brands