PG7
Rev. A2, 07/16
6
Automation Products Group, Inc.
Accessing the Mode Setting:
Step 1:
Simultaneously press and hold the
On/Off
button and the
(S)
button for approximately 3 seconds. This will bring up the 3 digit mode
number.
Step 2:
Enter the desired mode number (see mode definitions below) by
using
(Z)
to change the value of the flashing digit, and (S) to advance to
the next digit.
Mode Definitions:
Mode 000: Full Access
- Provides access to all menu settings.
If no buttons are pushed for
1 minute, the gauge will revert back to Mode 003 (factory default).
Mode 002: Limited Access
- Menu is locked
- (Z) button zeros the reading
- (S) cycles between the Max and Min readings
- On/Off functions only on battery powered gauges
Mode 003: Factory Default
- Full access
except
Full Scale Calibration is locked
Mode 005: Locked Access
- All buttons locked
except
the on/off button on battery powered
gauges.
www.
.com
1.800.561.8187
