APG DMS26, User Manual

Page: 25 / 28

DIGITAL MANAGEMENT SYSTEM DMS26
23
TECHNICAL SPECIFICATION
General
Inputs................................................................ 2
Input Impedance .............................................. > 10k Ohm, Electronically balanced
Maximum Input level........................................ +20 dBu
Outputs ............................................................. 4 [APG 24] or 6 [APG 26]
Output Impedance ........................................... <100 Ohm, ground balanced
Maximum Output Level ................................... +22 dBu into 600 Ohm load
Sample Rate .................................................... 96 kHz
Bit Depth ......................................................... 24 bits
Frequency Response ...................................... 10 Hz to 40 kHz, +/-3dB (filters disabled)
20 Hz to 20 kHz, +/-0,5dB (filters disabled)
THD ................................................................. <0,01 %, (+10 dBu, 20 Hz to 20 kHz, 30 kHz bandwidth)
Dynamic Range ............................................... >112 dB (A weighted, 22kHz bandwidth)
>109 dB (un-weighted, 22kHz bandwidth)
Serial Comms Data ......................................... 38.4kbaud, format: 8 data, 1 stop, no parity
Processing
Gain ................................................................. +20 dB to –80 dB and mute, 0,2 dB steps
Output Ch. Source ........................................... Input A, Input B and SUM
HP filter frequency ........................................... Off, 10 Hz to 25,4 kHz, 1/36 d’octave steps
LP filter frequency............................................ 10 Hz to 25,4 kHz and Off, 1/36 d’octave steps
LP / HP filter type ............................................. 12, 18 and 24 dB/octave Bessel and Butterworth
12, 24 and 48 dB/octave Linkwitz Riley
4
th
or 8
th
order Hardman
Delay, ............................................................... Input 400ms, output 80ms
Limiter............................................................... High performance limiter, adjustable threshold in 0.2dB steps,
automatic
time constants
EQ Frequency.................................................. 10Hz to 25kHz, 1/36 octave steps
EQ Gain ........................................................... +15dB to -15dB, 0.2dB steps
EQ Width ......................................................... 5.0 to 0.1 octaves bandwidth, 1/36 octave steps
Connectors
Audio inputs ..................................................... 3 pin female XLR
Audio outputs ................................................... 3 pin male XLR
Serial comms ................................................... Future option
Network comms ............................................... Future option
Mains ................................................................ 3 pin IEC
Characteristics
Mains Power ................................................... Universal switch-mode PSU, 85v to 250v AC, 50/60 Hz
Consumption .................................................... < 25 Watts
Dimensions ..................................................... 44 mm (H), 482 mm (W), 254 mm (D)
Weight .............................................................. 2,7Kgs net