APG DMS26, User Manual

Page: 8 / 28

DIGITAL MANAGEMENT SYSTEM DMS26
6
THANKS AND UNPACKING
Thank you for choosing a APG France Digital series loudspeaker management system for your application. Please spare
a little time to study the contents of this manual, so that you obtain the best possible performance from this unit.
All APG France products are carefully engineered for world-class performance and reliability. If you would like further
information about this or any other APG France product, please contact us. We look forward to helping you in the near
future.
Unpacking the APG Digital series processor
After unpacking the unit please check carefully for damage. If damage is found, please notify the carrier concerned at
once. You, the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment.
IMPORTANT SAFETY INFORMATION
Please read carefully and keep the following instructions and safety information. Heed all warnings and follow all
instructions.
- Do not remove covers. There are no user serviceable parts inside, please refer servicing to qualified service
personnel.
- This equipment must be earthed.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into he apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
REGULATORY COMPLIANCE
This product complies with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) as issued
by the Commission of the European Community.
Compliance with these directives imply conformity with the following European standards:
- EN60065 : Product safety
- EN55103-1 : Electromagnetic Interference (Emission)
- EN55103-2 : Electromagnetic Susceptibility (Immunity)
This product is intended for operation in the E2 (commercial & light industrial) and E3 (urban outdoors) Electromagnetic
environments.