DIGITAL MANAGEMENT SYSTEM DMS26
14
DSP processing - Input Channels
Gain
Knob A: Gain, adjustable in 0.2dB steps from –80 dB to +20dB
Delay
Knob A: Delay, adjustable in variable steps from 0 to 400ms
The delay parameter is adjustable in fine steps at low values; the adjustment becomes progressively coarser as the
value increases. The velocity sensitive Parameter Knobs therefore provide accurate setting of driver offset delays
(typically below 10ms) and rapid setting of longer system alignment delays.
High Pass Filter
Knob A: Frequency, out (off), 10.0Hz to 25.6kHz in variable steps
Knob B: high pass filter type
Summary of Contents for DMS26
Page 1: ...USER GUIDE DIGITAL MANAGEMENT SYSTEM PROCESSOR DMS26...
Page 2: ......
Page 26: ...RECALL SHEET...
Page 27: ......
