AD-800
37
A
P
E
X
D
I
G
I
T
A
L
Customizing the Function Settings
INFORMATION
2.1.1.3
Surround
2.1.1.4
LFE (Audio - Speaker -
Subwoofer Setup)
2.1.1.4.1 Off
2.1.1.4.2 On
2.1.2
Attenuation
2.1.2.1
Value:0000000000
2.1.2.2
Value:0000000000
2.1.2.3
Value:0000000000
2.1.2.4
Value:0000000000
2.1.2.5
Value:0000000000
2.1.2.6
Value:0000000000
2.1.2.7
Value:0000000000
2.1.2.8
Value:0000000000
2.1.3.1
Left
2.1.3.1.1 Value:0000000000
2.1.3.2
RIght
2.1.3.2.1 Value:0000000000
2.1.4
Speaker Delay Setup
2.1.4.1.1 Value:0000000000
2.1.4.2.1 Value:0000000000
2.1.4.3.1 Value:0000000000
2.2
Downmix Mode Setup
2.3
Bass Cutoff
2.4
Dynamic Range Setup
2.4.1
Full
2.4.2
Medium
2.4.3
Minimum
2.5
Decode Setup
2.6.1
Off
2.6.2
On
COMMENT
Surround L and R
Subwoofer
LFE speaker doesn’t exist
LFE speaker exists
The attenuation to use for each speaker in negative dB. Attenuation can be changed for each
speaker to allow balance control.
Range 0 to 127
Range 0 to 127
Range 0 to 127
Range 0 to 127
Range 0 to 127
Range 0 to 127
Range 0 to 127
Range 0 to 127
Digital Attenuation Setup
Range 0 to 127
Digital Attenuation Setup
Range 0 to 127
The delay factor to use for the center and rear speakers
Center speaker delay in ms. range 0 to 20
Rear left speaker delay in ms. Range 0 to 20
Rear right speaker delay in ms. range 0 to 20
Remove this item
Remove this item
The amount of compression to use on the content’s audio
All the full dynamic range of the content
Use medium compression on the dynamic range
Use maximum compression on the dynamic range
Select the current audio decode mode. At the same time, only one mode can be activated.
Turn off
Turn on
