AD-800
13
A
P
E
X
D
I
G
I
T
A
L
BEST PICTURE
A TV with the Component Video input allows you to enjoy the sound and picture quality of the DVD video discs.
Connecting to an Audio System or TV Component Video Input
NOTICE
• It will be helpful to also refer to the manual of the connected TV.
• Turn off the power and unplug both units before setting up any connections.
• Keep the DVD video player away from any tuner or radio to avoid any static or distorted sound during a broadcast.
• When connecting or disconnecting the DVD video player, be sure to turn off the amplifier to avoid any speaker damage.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortably modest
listening level to avoid any speaker damage.
NOTICE (COMPONENT VIDEO OUTPUT)
Component input terminals when connected to selected TV's and monitors will produce a higher quality picture playback. Depending
on the selected TV's and monitors, the wording of the component input terminals may vary. (ie:R-Y, Y, B-Y, etc.) If there are any
fluctuations with the color played back adjust the TV or monitor to achieve the best audio and picture.
Connect the DVD Video Player with Y Video, Cr
Video and Cb Video, if TV has Progressive Scan or
Component Video Input.
Press I/P button on remote control unit to switch
between Progressive Scan or Component Video
Input.
5.1 CHANNEL
"Speaker Setting" in setup
menu must be changed to
use these connectors.
Cr
Cb
Y
VIDEO
OUT
S-VIDEO OUT
COAXIAL
DIGITAL AUDI OUT
(PCM/BITS STREAM)
OPTICAL
CENTER
SURROUND
FRONT
SUB
WOOFER
SURROUND
FRONT
To Y VIDEO IN
Red
Red
White
White
To
Y VIDEO
OUT
To Pr/Cr VIDEO IN
To
Pr/Cr
VIDEO OUT
To Pb/Cb VIDEO IN
To
Pb/Cb
VIDEO OUT
AUDIO
