6
Remove the battery compartment cover.
Load two AA batteries into the battery compartment.
Make sure that the batteries have been inserted prop-
erly, matching to the s, - marked in the bat-
tery compartment. Close the battery compartment
cover.
When replacing batteries, replace both batteries. Do
not mix new and used batteries together, otherwise,
battery life will be much shorter than normal.
The remote control transmits a directional infrared
beam. Be sure to aim the remote control directly at
the infrared sensor of the unit during operation.
If the sensor has been covered or there is a large
object between the remote control and the sensor, the
sensor will not respond.
The sensor may not able to receive the remote signal
when it is exposed to direct sunlight or a strong artifi-
cial light (fluorescent or strobe light). In this case,
change the direction of the light or reposition the unit
to avoid direct lighting.
Remote Control Battery Installation
Within approximately
6 meter (20 feet)
Remote Sensor
