Apelson CMA6SS, User Manual

Page: 18 / 24

18
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The coffee is not hot The cups were not preheated. Warm the cups by rinsing them with hot
water.
The infuser has cooled down because
2/3 minutes have elapsed since the
last coffee was made.
Before making coffee, heat the infuser
by pressing the button to make rinse
The machine cannot make coffee
there is air in the hydraulic circuit.
Open steam/hot water valve and deliver
water from the nozzle
The coffee is not creamy enough. The coffee is ground too coarsely. Turn the grinding adjustment knob one
click anticlockwise towards small symbol
while the coffee mill is in operation.
Wrong type of coffee Use a type of coffee for espresso coffee
makers.
The coffee is delivered too slowly or
a drop at a time.
The coffee is ground too finely Turn the grinding adjustment knob one
click anticlockwise towards big symbol
while the coffee mill is in operation
Continue one click at a time until coffee
delivery is satisfactory.
The effect is only visible after delivering
two coffees.
The coffee is delivered too quickly. The coffee is ground too coarsely. Turn the grinding adjustment knob one
click anticlockwise towards small symbol
while the coffee mill is in operation
The effect is only visible after delivering
two coffees.
Coffee does not come out of one of
the spouts.
The spouts are blocked. Clean the spouts with a toothpick
Water comes out of the spouts
instead of coffee(use coffee powder)
The pre-ground coffee may be blocked
in the funnel.
Clean the funnel with a wooden or
plastic fork, clean the inside of the
machine.