Apelson CMA6SS, User Manual

Page: 17 / 24

17
TROUBLESHOOTING
The following circumstances may not be a problem. Do not
contact the customer services until the problem has been
confirmed.
DISPLAY MESSAGE CAUSE SOLUTION
FILL water The water tank is empty or positioned
incorrectly.
Fill the tank with water and/or insert it
correctly, pushing it as far as it will go.
Fault 3 The grinding is too fine and the coffee
is delivered too slowly.
Turn the grinding adjustment knob one
click clockwise towards big symbol
The machine cannot make coffee
there is air in the hydraulic circuit.
Open steam/hot water valve and deliver
water from the nozzle
EMPTY GROUNDS The total number of makes of coffee
has reach to 15.
Extract the drip tray and empty the
grounds container and clean. Then put
to original position.
Important: when removing the drip
tray the grounds container MUST be
emptied, even if it is not completely full.
Missing tray (no tray) The tray not insert the machine or not
in right position
Put the tray to original position
Fill powder The “pre-ground Coffee” function has
been selected without placing any
pre-ground coffee in the funnel.
Extract the appliance and place
pre-ground coffee in the funnel by use
spoon
The funnel (A12) is blocked. Empty the funnel with the help of
a knife as described in the section
“Cleaning the pre-ground coffee funnel’.
Decalcify ready The machine must be de_scaled. The descaling procedure described in
the “De-scaling” section needs to be
performed as soon as possible.
FILL BEANS The coffee beans have run out Fill beans to container
Add more powder The powder not enough to make
coffee
Use spoon to add powder
Clean ready The inside of the appliance is very
dirty
Clean the inside of the appliance
thoroughly, as described in the section
“Cleaning and maintenance”. If the
message is still displayed after cleaning,
contact a service centre.