Apelson CMA6SS, User Manual

Page: 16 / 24

16
INSTALLATION
Put coffee machine in the guide. This action may need
2 people one is embrace the machine, other is adjust in
right location and grasp these screw.
Extracted the machine to outside. Open the coffee bean
cover to add coffee beans in container and open the tank
cover in left side to add water.
Take out the tank and add pure water in, then insert in
original position, put this machine to Built in cabinet. Put
the plug in power supply and turn on main switch on
appliance, you can use this machine.
If the coffee maker is installed over a warmer drawer
(500W max.), use the top surface of this as a reference to
position the rails.
Fix the power cable with the clip to avoid it tangling when
the appliance is inserted or extracted.
The power cable must be long enough to allow the
appliance to be extracted from the cabinet to fill the coffee
beans container.
A Switched Fused Connection Unit to BS 1363 Part 4 is
recommended
The fuse must be rated at 13 Amps.
The wires in the mains lead are coloured in accordance
with the following code:
Brown = L - Live
Blue = N - Neutral
Green and Yellow = - Earth
The connection point must be placed in a position adjacent
to the appliance so as to be readily accessible for an
engineer in the event of a breakdown.
Disconnect the appliance from the mains supply before
carrying out any kind of maintenance or cleaning.