The Force Dual Phase™ Operation Manual
12
Revision Date: 4/22/2019
Figure 12. Remove safety pin
2.5.6.
Rotate the plug inside the closure until the ears on the plug match up to the holes on the
nut, as shown below in Figure 13.
Figure 13. Rotate the plug inside the closure until the ears on the plug match up to the holes on the nut
2.5.7.
Attach chain hoist to eyebolt and carefully raise plug out of the nut (see Figure 14).
Caution: Only use hoist to lift the plug, not the entire vessel.
2.5.7.1. Use caution when raising or lowering plug as to not damage cup seal. Note:
Keep the plug horizontal, move it slowly, and do not force it to seal.
