The Bambino® and The Transformer® Operation Manual
Updated 5/4/2021
35
© Apeks LLC, 2019
In preparation for training please refer to the installation manual for unpacking and set up instructions. Below is a
checklist of what needs to be purchased or completed BEFORE scheduling your onsite training. Onsite training is a four
hour block of instruction that is NOT designed to include unpacking and set up. Incomplete items at the time of onsite
training will result in incomplete training or additional charges for rescheduling.
Our training process is as follows:
1.
Customers to reference the installation manual for instructions on un-crating and system set up.
2.
Customer to complete entire Pre-Training Checklist. See below.
3.
A FaceTime or Skype session is required
(when available)
to ensure checklist is complete, set up is correct and
cover basic operation and cleaning of the system.
4.
After 1-3 are complete, onsite training can be scheduled. There is a 2-3 week lead time. Schedule your training
http://www.apekssupercritical.com/training/
Pre-Training Checklist:
Below is a checklist of what needs to be purchased or completed BEFORE scheduling your onsite training:
o
Must be complete before scheduling training:
Print complete operation manual and have on site the day of
training, along with the chiller manual.
o
Must be complete before scheduling training:
Apeks system and diaphragm compressor are unpacked and set up in
location of operation. Refer to unpacking instructions in the installation manual.
o
Must be complete before scheduling training
: See installation manual for electrical requirements for your system.
All electrical connections are to be completed before onsite training is scheduled.
o
Must be complete before scheduling training:
Purchase and have on site for training:
o
Bottles of CO
2
, gas feed, check valve free, food grade or better. Minimum requirements are:
o
(3) 50 lb. bottles for 5LD and 5Lx5LD
o
(4) 50 lb. bottles for 20LD
o
(4) 75 lb. bottles for 20Lx20LD
o
Distilled water and Propylene glycol 90/10 mix:
o
Total gallons of mixture needed for system:
o
5LD – 5 gal
o
5Lx5LD – 6 gal
o
20LD – 7 gal
o
20Lx20LD – 9 gal
o
190 or higher proof ethanol
