The Bambino® and The Transformer® Operation Manual
Updated 5/4/2021
26
© Apeks LLC, 2019
6.1.3.
If the belt needs adjusted loosen the 4 bolts holding the motor to the base.
Figure A3.
Bolts holding motor to base
6.1.4.
Before moving the motor retighten the bolts to finger tight (this keeps the motor from lifting up on
one side during adjusting due to the belt tension).
6.1.5.
Adjust the set screws on the motor base in or out to tighten or loosen the bolt as necessary.
Figure A4.
Bolts holding motor to base, loosened
6.1.5.1.
Be sure to check motor shaft alignment (note: can be up to 1/8
″
difference from side to side).
Figure A5.
Checking alignment
