Wire Harness Installation
App Dashboard Screen
If you are on the dashboard screen and rotate your phone counter-
clockwise, then you the gauges will rotate to a landscape view.
If you are on the dashboard screen and rotate your phone clockwise, then
you will be taken to the data-logging screen.
4
9
6)
Connect the Yellow 12V power wire to a switched 12V power
source on your vehicle.
7)
The purple wire outputs the raw signal from the Flex Fuel
Sensor. The Multi-Gauge Module has a built in 10K pullup to
5V on this signal. This can be used to connect to your ECU if
your ECU.
4)
Plug the flex fuel sensor
connector from the Multi-
Gauge wiring harness into
the Flex Fuel Sensor.
5)
Connect
the
ground
terminal to a suitable
ground in your vehicle.
